Henry lever-action .22 guide: H001 Classic, Carbine, Large Loop and Magnum

Quick answer
The Henry H001 Classic is the default lever .22: 18.5 in barrel, 14 LR / 16 L / 21 Short in the tube, 5.25 lb and $440 MSRP. The Carbine (16.5 in, 12 LR) and Large Loop cost $470. A .22 Magnum version is also available. All have a 3/8 in grooved receiver for scope rings.

We haven't tested this hands-on yet. Everything below comes from manufacturer specs, regulations and published sources, cited inline. Prices are maker MSRPs as listed in October 2026 unless noted.

Models compared

ModelBarrelCapacityWeightMSRP
H001-22 Classic Rifle18.5 in round, 1:1614 LR / 16 L / 21 S5.25 lb$440 [1]
H001L-22 Large Loop18.5 in, 1:1614 LR / 16 L / 21 S5.25 lb$470 [1]
H001R-22 Classic Carbine16.5 in, 1:1612 LR / 14 L / 18 S5 lb$470 [2] [1]
H001M .22 Magnumsee Henrysee Henry-$609 (Jan 2025 list) [3]

Henry's January 2025 price list showed the H001 at $425 [3]. The current spec sheet lists $440 [1], so prices have risen.

What sets a lever .22 apart

Where it fits

A lever .22 suits plinking, small game at modest range and anyone who likes a traditional rifle. It's not a precision competition rifle: NRL22 shooters overwhelmingly use bolt guns (see NRL22 Base builds). For squirrel hunting comparisons see best .22 for squirrels.

RifleActionBarrelTriggerMagazineOptic mountWeight (lb)MSRP (source, date, confidence)Aftermarket depthNRL22 fit
Henry Mini Bolt Youth G2Single-shot boltStainless (see Henry spec)FactorySingle-shotFiber-optic sights3.25$335
Henry MSRP. source, 2026-10-11, conf: high
LowNot allowed: NRL22 requires removable magazines
Ruger American RimfireBolt; 60-degree throw18 in 1/2-28 threaded (8305); other lengths by modelMarksman Adjustable 3-5 lb10/22 BX-1 rotary3/8 in rimfire base machined in; drilled and tapped for Weaver #125.5$509
Ruger suggested retail $509 (model 8305; other RAR models vary). source, 2026-10-12, conf: high
Medium (some stocks; uses 10/22 mags)Base: leaves ~$1,141 for scope
Ruger 10/22 CarbineSemi-auto blowback18.5 in (unthreaded on 1103; threaded models exist)Factory (BX trigger upgrade common)BX-1 10-rd rotary (BX-25 etc.)Combination scope base included—$350
$349.99 MSRP per retailer listings; Ruger page did not show price to our fetch. source, 2026-10-12, conf: med
Very high (largest .22 aftermarket; barrels, stocks, triggers, receivers)Base price-eligible
CZ 457 AmericanBolt; 60-degree throw; swappable barrel24.8 in sporter, cold-hammer-forged, 1:16 (unthreaded; threaded/SR variants exist)Adjustable (weight/creep/overtravel)CZ 457 polymer 5-rd11 mm dovetail~6$729
$729 MSRP as shown by US retailers (CZ-USA page did not show a price to our fetch). source, 2026-10-12, conf: med
Very high (shares 457 parts)Base: leaves ~$921 for scope

MSRPs from the maker where available, otherwise labeled retailer listings, checked Oct 2026. Aftermarket depth and NRL22 fit are our editorial summaries (NRL22 Base: rifle plus scope MSRP up to $1,650). Specs are published figures, not our measurements.

Our range results (coming soon)

This box will hold our own groups, chronograph data and photos for this topic once we've shot and recorded them. Until then, every accuracy number on this page comes from the published source cited next to it. We have not tested these rifles or products hands-on for this article.

FAQ

How many rounds does a Henry Classic lever .22 hold?

The 18.5 in H001 holds 14 .22 LR, 16 Longs or 21 Shorts. The 16.5 in Carbine holds 12 LR.

Can you scope a Henry lever .22?

Yes. The receiver has a 3/8 in groove for rimfire rings.

Does the Henry lever .22 have a safety?

It uses a quarter-cock hammer position rather than a crossbolt safety.

Sources

  1. Henry H1 rimfire lever-action spec sheet
  2. Henry H1 Classic Rifle & Carbine
  3. Henry Repeating Arms MSRP list (Jan 2025)

Confidence: maker specs and prices are high confidence as of the date seen; forum and owner reports are low–medium confidence and labeled as such.

Not affiliated with Sako/Tikka, CZ, Bergara, Ruger, Savage or any retailer. We have not tested products hands-on for these guides; figures come from cited sources. Affiliate disclosure · Privacy · Terms · Rimfire Builds is operated by Tomahawk Designs LLC, Utah · [email protected]